Apantac Demonstrates Extended Line-up of KVM over IP Extenders at ISE 2019
Apantac, an internationally recognized manufacturer of multiviewers, video walls, extension and signal processing solutions announces that it is launching new models of KVM over IP extenders & matrices, which it will showcase at ISE 2019, stand 10.S120.
The KVM over IP extender/receiver sets are used as point-to-point HDMI/DVI/VGA video, audio, USB and RS232 extension solutions. Alternatively, these solutions can be used as a KVM over IP matrix when multiple sets are connected via an IP switch. In this configuration, users can access any server attached to the IP switch. Concurrent access to a server from several remote consoles is also possible.
The KVM over IP extenders/matrices are designed for applications where multiple local computers need to be accessed from multiple remote locations. Available for both unicast and multicast transmissions, signals can be sent over IP to single recipients, or multiple groups on a network.
Application Example: Receivers can be configured to feed a video wall whereby each receiver will crop and zoom source signals and display them on each monitor of the wall. Multiple layouts can be created; e.g. a single source in full screen mode; each monitor displaying a different source; as well as other configurations. The wall configuration and control are managed from a separate Windows application or directly from the console menu.
A unique feature (rarely found with equivalent products on the market), is that all the monitor pictures are in sync with each other. This avoids visual artefacts when the source signal is a moving picture.
These devices can be managed and configured on a network from a Windows interface. In the case of limited bandwidth, bit rate and frame rate are configurable providing a useful bandwidth management feature.
Existing models include a HDMI/DVI/VGA video input and output with resolutions up to 1920x1200p60. Models include: • Single head KVM over IP Extender/Receiver Set: KVM-IP-Tx/ KVM-IP-Rx (Set 12-II) • Dual head KVM over IP Extender/Receiver Set: KVM-2-IP-Tx/ KVM-2-IP-Rx (Set 13)
New models include a HDMI video inputs and output, HDMI input loop for the transmitter/extender and POE (Power Over Ethernet) with resolutions up to 4K @30Hz. • Single head KVM over IP Extender/Receiver Set for 4K: KVM-IP-Tx-PL / KVM-IP-Rx-P (Set 14)
Apantac will showcases its new KVM over IP solutions at ISE 2019 stand 10.S120.